TITAN ARRAY SYSTEM V2

Run music, microphones, and live instruments through one column PA system for DJ sets, band performances, ceremonies, and spoken-word events. Dual 10-inch subwoofer drivers handle the low end, while ten 3.5-inch drivers in two speaker columns reproduce vocals and instruments. The system delivers 800W RMS, with 1600W program and 3200W peak ratings.

The mixer is built into the powered subwoofer, so you can connect your sources without bringing a separate mixer for a simple setup. Use the XLR/1/4-inch combo inputs for mic and line connections, RCA for a wired audio source, or Bluetooth 5.0 for streaming. USB and SD playback give you another way to play tracks, and an XLR mix output lets you connect additional speakers or an amplifier.

Choose from Normal, DJ, Voice, Live, and Flat DSP presets to suit the material you are playing. A built-in limiter helps manage signal peaks. The speaker columns rotate through 360 degrees, allowing you to aim them toward different parts of the room; this is adjustable positioning, not a claim of uniform sound in every direction. For a stereo setup, link two systems wirelessly or connect them by cable.

Plywood enclosures and a scratch-resistant sandblasted finish are designed for regular transport. The subwoofer weighs 49.6 lb and has two carry handles, while each column weighs 5.2 lb. A travel bag for the columns and a protective subwoofer cover are included for packing up after the event.

Connections and Controls

• Mic/Line XLR/1/4-inch combo input, Line XLR/1/4-inch combo input, and RCA input
• XLR mix output for additional speakers or amplifiers
• Bluetooth 5.0 streaming with a listed range of 65 feet
• USB and SD playback with a listed 32GB maximum capacity
• DSP presets: Normal, DJ, Voice, Live, and Flat
• Built-in limiter to help control signal peaks
• Wireless stereo linking between two systems; wired linking also supported
• Speaker columns rotate through 360 degrees for adjustable positioning

Specifications

• Power: 800W RMS / 1600W program / 3200W peak
• Subwoofer drivers: Two 10-inch drivers with listed 80 oz magnets and 2-inch oxygen-free copper voice coils
• Column drivers: Ten 3.5-inch neodymium drivers, arranged as five drivers in each of two speaker columns
• Column assembly: Two driver-equipped columns and one empty spacer section
• Maximum SPL: 127 dB
• Frequency response: 41Hz23kHz at -10 dB; 44Hz19.8kHz at -3 dB
• Listed coverage: Up to 10,000 square feet and venues with up to 300 people; actual coverage depends on the room, placement, and required listening level
• Enclosures: Plywood; subwoofer finished with scratch-resistant sandblasted paint
• Subwoofer dimensions: 20.68 x 14.9 x 21.8 inches
• Column dimensions: 5.32 x 3.94 x 19 inches each
• Subwoofer weight: 49.6 lb
• Column weight: 5.2 lb each
• Subwoofer carrying handles: Two

In the Box

• Powered dual 10-inch subwoofer with built-in mixer and DSP
• Two speaker columns, each with five drivers
• One empty column spacer section
• Travel bag for column speakers
• Protective subwoofer cover
• 8-foot power cable
• Owners manual and warranty card