RV69.2C 2-Pair

Price is for (2) Pairs of Rockville RV69.2C 6×9 Component Car Speakers Totaling 2000 Watts/440w RMS CEA Rated

Video of RV69.2C:

Includes:

• (2) 6×9 speakers
  
• (2) tweeters
  
• (2) Crossovers
  
• (2) Grills
  
• Flush and surface Mounting accessories
  
• Speaker wire

Rockville car audio speakers utilize the latest in speaker technologyfor superior sound quality. We use top quality polypropylene coneswhich are known for their high damping qualities. This means they canhave a controlled break-up, which results in a smoother high frequencyroll-off. Our Flexmotion Butyl Rubber Surrounds give the speakers asmooth response with minimal distortion. For smooth and extended highfrequency sounds we used high temperature PEI dome tweeters with ferritemagnets. The RV series speakers are designed with superior SPLresponse and extremely high power handling making these perfect for usewith the amp built into your receiver or with a high powered externalamplifier. Due to their shallow mount design, these speakers fit in 97%of all vehicles.

CEA Rated
Rockville car audio speakersare CEA rated, what that means is that the Consumer ElectronicsAssociation recognizes these speakers to be accurately rated and meettheir rigorous standards for wattage, SPL and frequency response. Sowhile other manufacturers state out-of-this-world wattages on theirproducts, you can rest assured that your Rockville speaker will work upto spec. and exceed your expectations.

Top of the line components!
Rockvillespeakers only use the best sourced components. We use efficient andhigh powered magnets along with aluminum voice coils wound with 100 %oxygen free copper. We pay attention to every detail ensuring you getthe best sound in your car.

Features:

• Rockville RV69.2C 6×9 Component car speakers (pair)
  
• Peak Power Rating: 1000 Watts per Pair / 500 Watts Each
  
• CEA Compliant RMS Rating: 220 Watts per Pair / 110 Watts Each
  
• Injection Molded Polypropylene woofer cone gives amazing bass and mids
  
• Flex Motion Butyl Rubber Surround
  
• 1.2 PEI dome tweeter with ferrite magnet give amazing highs
  
• Flush and surface mounting tweeter options
  
• Fine-tuned 2-Way Crossover, 12db/Octave Roll Off
  
• Ferro Fluid Cooled Tweeter Magnet
  
• Steel high quality basket
  
• Rubber magnet boot cover
  
• Frequency response: 30-22,000 Hz
• Crossover will cut anything lower than 3.5 Khz @ 12 dB / octave slope from the tweeters
• Crossover will cut anything higher than 3.5 Khz @ 12 dB / octave slope from the woofers
• Sensitivity: 91 dB @ 1w/1m
  
• Mount depth: 3.35″
  
• Impedance: 4 Ohm
  
• Grilles included
  
• 1.2 Inch Aluminum voice coils
• 100% oxygen free copper voice coil windings
  
• Black electro-plated T-yoke and washers
  
• Cotton spider material
  
• Copper terminals
  
• Cutout diameter: 8.58 x 5.83
  
• Magnet: 27 Oz Y25 magnet
  
• Magnet dimensions: 120mm x 18mm
• Fs: 60.735 hz
  
• Re: 3.6 OHM
  
• Qes: 1.638
  
• Qts: 1.066
  
• Qms: 3.05
  
• Fits 6×9
  
• Top mounting depth of woofer: 3.35 Inch (95% of installs use the top mounting depth)
  
• Bottom mounting depth of woofer: 3.62 inch (This measures the speaker from top to bottom)
  
• Top mounting depth of tweeter: 0.79
  
• Bottom mounting depth of tweeter: 1.18
  
• Tweeter mounting diameter: 1.93