EZVIZ T1C PIR Motion Sensor
- Category: Electronic products
- Product Code: SQOK90555680893
- Availability: In Stock
- $19.04 $23.80
T1C
PIR Motion Sensor
Requires using with the EZVIZ Home Gateway A3
Know when theres activity at home
Get notified immediately when someone sets foot in your room. EZVIZs new T1C motion sensor uses passive infrared (PIR) technology to detect human movement, and can send alerts right to your smartphone. The T1C Sensor connects to your EZVIZ Home Gateway, and is mini-sized to fit onto any wall or corner for an easy DIY security solution.
Wide-Angle Detection
Adjustable 360
Human Motion Detection
Anti-Tamper Alarm
Peel-and-Stick Installation
Instant Alerts via EZVIZ App
Energy-Saving Design With Long Battery Life
Smart Integration With EZVIZ Cameras
It goes anywhere to cover every corner
Install the PIR sensor anywhere you need protection and rotate it a full 360 degrees to find the best detection angle. You can also fine-tune its detection coverage using the pet shield to partially cover the sensor, so it only alerts about human activities, rather than every time your pet runs through the room.
360 Adjustable Installation
Use Cover to Avoid Pet-Triggered Alerts
45 Detection Range
45 Non-detection Zone
Easy integration with your smart home
Connect your sensor to the Home Gateway and link it with your EZVIZ cameras for enhanced protection all via the EZVIZ App. If you use a local storage card or have subscribed to EZVIZ CloudPlay, the camera can begin auto-recording for 5 seconds whenever the sensor detects an activity.
A product that you can set and forget
The peel-and-stick installation makes it easy for you to find the best setup for your home. The included battery in the sensor can provide up to 2 years of power when the energy-saving mode is enabled.
Up to 2 Years of Battery Power
Anti-tamper alarm for added protection
For extra peace-of-mind, the sensor alerts you immediately when anyone forcibly removes its cover.
Expand your EZVIZ alarm system
The PIR sensor can be conveniently added to your EZVIZ alarm system for expanded protection. You will be notified of any detected activity, all through the EZVIZ App.
PIR Sensor
Open/Close Sensor
Smart Button
Gateway
T1C PIR Motion SensorKnow when theres activity at homeSpecifications
| Specifications | |
|---|---|
| Model | CS-T1C-A0-BG |
| General | |
| Operation Conditions | -10 C to 55 C (14 F to 131 F), humidity 95% or less (non-condensing) |
| Dimensions | Main body: 43.5 32.0 mm (1.7 1.3 inch) Base: 29.0 9.5 mm (1.1 0.4 inch) |
| Package Size | 92 52 93 mm (3.6 2.0 3.7 inch) |
| Weight | 92 g (3.2 oz) with package |
| Detection | |
| Detection Type | Passive infrared (PIR) |
| Detection Distance | Up to 7 m / 23 ft |
| Detection Angle | 90 horizontal, 90 vertical |
| Recommended Installation Height | 1.8 to 2.5 m for wall-mounted installation |
| Pet-Proof Detection | Requires using the pet shield and an installation height of 50 cm or higher above the pet |
| Function | |
| Low Battery Reminder | Supports |
| Anti-Tamper Alarm | Supports |
| Installation Methods | Adhesive back with magnetic parts. Supports wall and ceiling flip-over installation |
| Battery | |
| Battery Type | Cell battery CR2450 |
| Battery Life | High-performance mode: Up to 1 year Energy-saving mode: Up to 2 years |
| Network | |
| Protocol | ZigBee 3.0 |
| Communication Distance | < 200 m (Tested in open environment) |
| In the box | |
| In the box | – T1C PIR Sensor |
| – Pet Shield | |
| – Doubled-sided Tape | |
| – Regulatory Information | |
| – Quick Start Guide |
There are no reviews yet.
